film faced plywood

Film faced plywood Core: Hardwood, poplar, or combi, birch Glue: WBP, Melamine, MR Size: 1220*2440*9/12/15/18/21mm, etc.

Product Name	Film faced plywood
F/B	Black film, brown film, red film
Grade	first grade
Core	Poplar, hardwood, combi, Eucalyptus, birch
Glue	Melamine/WBP/MR
Thickness	9mm-21mm
Specification	1220X2440mm, 1250X2500mm
Moisture Content	14-16%
Package	Seaworthy packing
Certificate	ISO9001, CE
MQQ	1X20GP
Price terms	EXW, FOB, CNF, CIF
Payment	T/T, 100% irrevocable L/C
Delivery time	Usually 28 days after receipt of the original L/C or the 30% advanced payment
Supply Capacity	100,000 CBM/year
Usages:	Can be widely used for building, etc
Remarks:	Top class equipment with top class produce technique; Credit first, Fair trading

CONSERVE AND MAINTAIN:STORAGEAlways clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.

SEALING OF EDGESPhenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.

SEALING OF HOLESAny holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.

CLEANING AND REPAIRTo obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiff brush. It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete

film faced plywood